This was a poor attempt by me to show all of the x-member cutting needed in one shot. There is a bunch and I am not through cutting. More firewall will have to be cut out because of the strut mount and it's connection to the front rollcage hoop on either side. While it looks like a massive amount of metal has been removed, the total is probably under 50 pounds. Also notice that the frame kick up now lies in virtually the same place as the old frame horn. The inside of the original frame has been completely removed and the new frame stitch welded to the outer piece. I'll probably add more welds in this area.






Copyright (C) 1999 - 2004, all dates inclusive, L.E. Mayfield - All Rights Reserved